When selecting wear-resistant coatings for the hardware and machinery industry, you must first clarify core parameters such as the wear type of the working condition and operating temperature. Airuisen's related products can adapt to most hardware and machinery scenarios. Below are specific selection guides, testing suggestions, and key points for purchasing communication.
Direct Conclusions for Selecting Wear-resistant Coatings for Hardware & Machinery
When selecting wear-resistant coatings for the hardware and machinery industry, you must prioritize matching the wear type of the working condition, operating temperature, contact medium, and component material. Airuisen TS228 small ceramic particle adhesive is suitable for high-abrasion scenarios, metal repair agent TS2111 is ideal for wear-resistant repair of metal components, and flat sealant 1598 can be used for flange parts requiring both sealing and wear resistance.
Core Parameters to Confirm Before Purchasing
| Parameter Item | Confirmation Content |
|---|---|
| Wear Type | Abrasive Wear/Adhesive Wear/Fatigue Wear |
| Operating Temperature | Long-term/Short-term Maximum Temperature Range |
| Contact Medium | Whether in contact with oil, water, or chemical media |
| Component Material | Cast Iron/Stainless Steel/Aluminum Alloy, etc. |
Steps for Selecting Wear-resistant Coatings
Step 1: Clarify the worn parts and specific working conditions of the hardware and machinery components; Step 2: Match the corresponding type of wear-resistant coating (ceramic particle/metal repair/sealant wear-resistant); Step 3: Verify the adaptability of product parameters to the working condition, for example, select TS228 for mill components with high abrasive wear, and select 1598 for metal flanges requiring both sealing and wear resistance.
Sample Making and Testing Suggestions
- Apply for small-sized samples of the corresponding Airuisen model (e.g., TS228 1kg package)
- Make small-area samples on the actual worn parts
- Test for 7-14 days, observe the coating wear rate and bonding strength
- If the test fails to meet standards, you can confirm other compatible models with the purchasing consultant based on the working condition
Common Selection Misconceptions
Common misconceptions include blindly selecting high-cost and high-wear-resistant coatings, ignoring the impact of temperature on coating performance, and bulk purchasing without making samples. For example, mistakenly selecting ordinary metal repair agent for chutes with high abrasive wear will cause the coating to peel off and fail quickly.
Bulk Purchasing Communication Checklist
| Communication Item | Content to Provide |
|---|---|
| Product Model | Confirm compatible models such as Airuisen TS228/1598 |
| Purchasing Quantity | Determined based on actual demand after sampling |
| Delivery Requirements | Delivery location, whether expedited delivery is needed |
| After-sales Support | Whether technical guidance and sample replacement are provided |
Common Questions
Q: Which hardware and machinery components is Airuisen TS228 suitable for?
TS228 small ceramic particle adhesive is suitable for hardware and machinery components with high abrasive wear such as mills, desulfurization pipelines, chutes, and cyclone impellers, with excellent wear resistance.
Q: What should I do if the test fails to meet standards after sampling?
You can inform Airuisen's purchasing consultant of the detailed working conditions (wear type, temperature, medium), and the consultant will recommend other compatible wear-resistant related products, such as metal repair agent TS2111, etc.
Purchasing Frequently Asked Questions
What information is required before bulk purchasing?
It is recommended to provide application scenarios, substrate materials, target strength, temperature resistance requirements, curing methods, packaging specifications, and estimated purchase quantity to facilitate quick determination of product direction.
Is a sample test required first?
Industrial adhesives are greatly affected by materials, surface treatment and usage environment. It is recommended to conduct a sample test before bulk purchasing, then confirm the model and packaging specifications.